Online only, not available for warehouse pickup.

ANALOG HIGH PRESSURE PUMP

ANALOG_HPPUMP

New

High-Pressure 12 psi Electric Pump!  

*INCLUDES SATURN VALVE ADAPTER

More details

This product is no longer in stock

$99.00

More info

Analog High Pressure Electric Inflator Air Pump for Boats, Rafts, Kayaks and SUPs.

High-pressure analog air pumps are automatic dual action pump designed to work with 12V car battery. This pump purpose is to blowup inflatable boats,inflatable rafts, inflatable kayaks, inflatable SUP paddle boards and other inflatable chambers with no effort at all. Just set the pressure by turning dial wheel, and press the ON Button. The pump will then inflate your boat to its correct pressure and will stop automatically once set pressure is achived.

Our Electric Air Pumps are perfect product for:

  • Inflatable boats.
  • Inflatable rafts.
  • Inflatable kayaks.
  • Drop-stitch high-pressure air floors.
  • Inflatable stand up paddle boards.
  • Inflatable fenders, and many more inflatable products...

Analog model of High Pressure Air Pump .

  • High-Speed fan and High-Pressure piston pump.
  • Automatic Stop when chosen pressure is reached.
  • Reliable design to reduce wear.
  • Gator clips for quick connection to the car battery.
  • All necessary adaptors are included.
  • FREE soft carry bag with included.
  • Warranty 90 days.

High-pressure inflator pump automatically stops at the pressure level that you select and is also ideal for deflating. Once you've used one of these pumps, you'll never manually pump your boat again, because you no longer need a hand pump.

Without a high-pressure electric inflator, you'd have to use a hand pump for around 15-20 minutes, under the hot sun, which might not be your idea of fun. With this magic pump, you will be ready to roll in under 10 minutes with no effort at all.

All high-pressure air pumps now come equipped with a set of generic plastic adaptors designed to fit most of air valves on a market and specialized valve adaptor designed to fit Saturn's Naru valves. Choose correct adaptor that will fit nicely into air valve, and will press pushpin down when inserted for proper inflation.

How 2 stage pump works:

When the pump starts it will be on a HIGH VOLUME (Turbine) pump until the pressure reaches 2-3 PSI. Then the pump will automatically switch over to the HIGH PRESSURE (Piston) pump and inflate the boat to its set pressure. You will hear sound of pump changing significantly when piston pump kicks in. Once reaching the set pressure the pump will automatically turn itself off.

Important warnings about High Pressure Analog Electric Pump:

  • DO NOT USE HAND PUMP ADAPTORS WITH HIGH-PRESSURE ELECTRIC PUMP!
  • CONNECT EPUMP ONLY TO FULLY CHARGED 12V CAR OR DEEP CYCLE BATTERY!
  • MAKE SURE VALVE PUSHPIN IS PRESSED DOWN WITH EPUMP ADAPTOR.
  • DO NOT USE EPUMP WITH ANY OTHER ADAPTORS EXCEPT PROVIDED.
  • DO NOT RUN EPUMP ON HIGH PRESSURE FOR LONGER THEN 15 MINUTES.
  • DO NOT DROP EPUMP ON HARD SURFACE OR SUBMERGE INTO THE WATER.
  • DO NOT LET SAND, DUST OR DEBRIS ENTER INSIDE AIR INTAKE.
  • DO NOT ATTACH ADDITIONAL ADAPTORS BETWEEN HOSE AND EPUMP.
  • MAKE SURE AIR IS NOT ESCAPING AROUND VALVE ADAPTOR OR HOSE.
  • DO NOT OPERATE EPUMP IF IT IS HOT. LET IT COOL BEFORE USE.

Instructions for operation of High Pressure Analog Electric Pump:

AVERAGE AIR PRESSURE FOR INFLATABLES:

  • BOAT TUBES: 20KPA (25KPA MAX)
  • BOAT KEEL: 30KPA (40KPA MAX)
  • BOAT FLOOR: 60KPA (70KPA MAX)
  • iSUP BOARD: 70KPA (80KPA)
  • Out of the several included valve adaptors, you will need to find one that fits tightly inside your air valve. The correct adaptor should have a small perpendicular plastic piece that goes inside across the tube or will have 2 small tabs. This perpendicular piece or tabs are designed to press on the pushpin inside the valve to open valve and allow air to be pumped inside boat chamber. Try different adaptors to see which one fit better and can firmly press on pushpin of your air valve.
  • Before attaching the hose with the correct plastic valve adaptor to your Saturn boat Naru valve, please make sure that the pushpin inside the valve is in the upper, locked position. Air will not escape from a chamber when the pushpin is in the upper position.
  • Insert the valve adaptor connected to the electric pump hose into the Naru valve, so that the perpendicular piece or tabs presses the valve pushpin down, and unlocks the valve by letting air in. Once the chamber is full to capacity, you will quickly pull one end of the electric pump hose, and the Naru valve will automatically lock itself.
  • Never inflate air valve that is locked. This will burn pump very quickly and will void warranty.
  • Set the proper air pressure in KPAs on your electric pump dial prior to operating the pump. Make sure that you do not over inflate the boat chambers. Please note, that high-pressure air floors withstand much more air pressure then boat tubes.
  • When the boat is deflated, the high-volume air pump will start quickly filling the chamber up to 80%, and then the high-pressure pump will kick in to fill the boat to the setting of the air pressure dial. You will hear more louder noise once high pressure piston pump will start working. That is normal. The pump should stop automatically once the correct air pressure is reached.
Battery Tip for Basic EPUMP without battery:

Battery is NOT included with EPUMP model of electric pump. This pump can be used with a car battery, or with portable 12V 7Ah batteries that are sold on EBay along with wall charger. Optional 12V 7Ah battery fits perfectly into pump's carry bag zippered pouch. Sealed 12V 7Ah Lead Acid Batteries and Wall Chargers are widely available on Internet.